FORMAT FOR THESIS - M.TECH MECHANICAL ENGINEERING

By
Advertisement
FORMAT FOR THESIS - M.TECH MECHANICAL ENGINEERING

COLLEGE NAME
Format for M. Tech Thesis synopsis
Title page:
1.       Name of Student and UNIVERSITY registration No cum Roll No
2.       Present official Address with E-mail, telephone No
3.       Branch (Full Time): Mechanical Engineering
4.       Year of Admission
5.       Number of subjects passed till date
6.       Proposed Topic:

·         Introduction (should not exceed 3 pages including Figs.)
·         Brief Literature survey (should not exceed 3 pages)
·         Problem formulation: Need and significance of proposed research work (should not exceed 1page)
·         Objectives (should not exceed 1 page)
·         Methodology/ Planning of work (should not exceed 2 pages)
·         Facilities required for proposed work
·         Proposed Place of work



SPECIFICATIONS FOR M. Tech THESIS
  1. The thesis shall be computer typed (English- British, Font -Times Roman, Size-12 point) and printed on A4 size paper.
  2. The thesis shall be hard bound with cover page in light green color. The name of the candidate, degree (specifying the specialization) ,year of submission, name of the University including college name shall be printed in black on the cover [Refer sample sheet (outer cover)]
  3. The thesis shall be typed on one side only with double space with a margin 3.5 cm on the left, 2.5 cm on the top, and 1.25 cm on the right and at bottom.
  4. In the thesis, the title page [Refer sample sheet (inner cover)] should be given first then the Certificate by the candidate and the supervisor(s) in sequence, followed by an abstract of the thesis (not exceeding 1500 words). This should be followed by the acknowledgment, list of figures/list of tables, notations/nomenclature, and then contents with page no’s
  5. In the body of the text, a reference should be indicated giving author name and year of publication in parenthesis such as (Kumar and Shan, 2002).
  6. The reference should be given at the end of the Thesis in alphabetical order indicating:
                                i.            The authors name and his initials
                              ii.            The title of the paper and name of the journal
                            iii.            The name of the book and the publisher
                            iv.            The number of the volume, page numbers, and the year of publication
                              v.            Standard abbreviation may be used in the names of the journals

For Example:

·  Laroiya, S.C. and Adithan, M. (1994), “Precision Machining of Advanced       Ceremics” Proceeding of the International Conference on Advanced Manufacturing Technology (ICMAT - 94), 29-30 August, 1994. University Teknoloi Malaysia, Johor Bahru , Malaysia, pp 203-210.
·         Singh, S. and Shan, H. S. (2002) “Development of Magneto Abrasive Flow Machining               Process”, International Journal of Machine Tools & Manufacturing, vol. 42, 2, 2002, pp. 953-959.
·        Adithan, M. and Gupta, A.B. (1996), “Manufacturing Technology”, New Age, International     Publishers, New Delhi.
7.       The diagrams should be printed on a light/white background; Tabular matter should be clearly arranged. Decimal point may be indicated by full stop (.)The caption for Figure must be given at the BOTTOM of the Fig. and Caption for the Table must be given at the TOP of the Table.
8.       The graphs should be combined for the same parameters for proper comparison. Single graph should be avoided as far as possible.
9.       Conclusions must not exceed more than two pages.
10.   The thesis must consist of following chapters
·         Chapter 1- Introduction
·         Chapter 2- Literature Review
·         Chapter 3- Present work (It can span in two to three sub chapters depending on the type and volume of the work)
·         Chapter 4- Result and Discussion
·         Chapter 5-Conclusions and future scope
·         References
·         Appendix (if any)
·         Annexure-I, II, III



 DEMO 


PROJECT TITLE NAME (24pt.)




THESIS (14pt.)

SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE AWARD OF THE DEGREE OF (12pt.)



MASTER OF TECHNOLOGY
(Mechanical) (14pt.)



SUBMITTED BY


NAME OF CANDIDATE (14pt)
December 2008







UNIVERSITY Logo







UNIVERSITY NAME
PLACE, INDIA (14pt.)






DEMO

PROJECT NAME




THESIS



SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE AWARD OF THE DEGREE OF



MASTER OF TECHNOLOGY
(Mechanical)


Submitted by

STUDENT NAME

Name of the College

YEAR



  


UNIVERSITY NAME
ADDRESS, INDIA (14pt.)
  




COLLEGE NAME



CANDIDATE'S DECLARATION


I hereby certify that the work which is being presented in the thesis entitled “TITLE ” by “NAME OF THE STUDENT” in partial fulfillment of requirements for the award of degree of M.Tech. (Mechanical) submitted in the Department of (Branch) at NAME OF THE INSTITUTE under UNIVERSITY NAME, Place an authentic record of my own work carried out during a period from ______ to _______under the supervision of NAME OF SUPERVISOR (S). The matter presented in this thesis has not been submitted by me in any other University / Institute for the award of M.Tech Degree.

Signature of the Student


This is to certify that the above statement made by the candidate is correct to the best of my/our knowledge



Signature of the SUPERVISOR (S)




The M.Tech Viva –Voce Examination of (NAME OF CANDIDATE) has been held on ____________ and accepted



Signature of Supervisor(s) Signature of External Examiner



Signature of H.O.D.



ACKNOWLEDGEMENT


The authors are highly grateful to the Principal, COLLEGE NAME, ADDRESS OF COLLEGE for providing this opportunity to carry out the present thesis/ work

The constant guidance and encouragement received from Er. ABC Asstt. Prof. and Head, Department of Mechanical Engineering, COLLEGE NAME,ADDRESS OF COLLEGE has been of great help in carrying our the present work and is acknowledged with reverential thanks.

The authors would like to express a deep sense of gratitude and thanks profusely to Er. ABC, Asstt. Prof., Department of Mechanical Engineering, COLLEGE NAME, who was the thesis Supervisor. Without the wise counsel and able guidance, it would have been impossible to complete the thesis in this manner.

The help rendered by Mr. ABC, Lecturer, COLLEGE NAME, for the literature, Mr. Sumit Kumar, OTHERS, and their associates for experimentation is greatly acknowledged.

The author expresses gratitude to other faculty members of Mechanical Engineering Department, COLLEGE NAME for their intellectual support throughout the course of this work.

Finally, the authors are indebted to all whosoever have contributed in this thesis work and friendly stay at COLLEGE NAME.



CANDIDATE NAME









  DEMO

CONTENTS

Page No.

Candidate's Declaration i

Abstract ii

Acknowledgement viii

List of Figures xvi

List of Tables xxii

Nomenclature xxvi

 

Chapter 1: INTRODUCTION 1

1.1 Non-Traditional Machining 1

1.2 AFM Process Principle 4
1.3 AFM Technology 6

      1. 4 AFM Applications 8

 

Chapter 2: LITERATURE REVIEW 14

2.1 AFM Process Parameters 14

2.1.1 Media Flow Volume and Extrusion Pressure 15

2.1.2 Media Flow Rate 16

2.1.3 Media Viscosity 17

2.1.4 Number of Cycles 18

2.1.5 Abrasive Grain Size and Concentration 18

2.1.6 Material and Geometrical Features of Workpieces 19
2.1.7 Rheology of Carrier Media 21

2.1.8 Initial Surface Condition 23

2.2 Modeling of AFM 24
                      2.2.1       Stochastic Modeling 24
2.2.2. Analytical Modeling 25

8 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. This article is so good. It helps me and my friends to know more about the mtech thesis. thanks for providing this helpful information to us.
    http://csiindia.net/

    ReplyDelete
  3. We provide complete help for M.Tech and PHD students for their Thesis work .Thesis is a very important part of your Masters degree , We help students in implementations , reprort writing , journal paper publication , Synopsis writing etc.

    ReplyDelete
  4. To help a student regarding his or her m.tech thesis is something we consider as our passion . No matter from which field you are just contact us for your thesis help and we will provide you best solutions for your m.tech thesis work.For more imformation visit our site : http://www.techsparks.co.in

    ReplyDelete
  5. This blog about the mtech thesis is really very informatic and help the students to reach heir goal.
    http://www.techpacs.com
    Thanks

    ReplyDelete
  6. On which topic should I carry forward my reserch work? How to proceed? How to publish my report? Don't get confused as Techsparks do it for you. Under the guidance of experienced profeesionals you will be having an ease with your Reserch project, starting from the scratch upto the end.For more information visit:http://www.techsparks.co.in

    ReplyDelete
  7. At Techsparks, we will be proving you complete imformation for your M.tech thesis.we will help you in any problem in thesis.Here’s you find complete solution for you thesis. For any imformation visit our site:techsparks.co.in and contact us at 9653159085

    ReplyDelete